products type

 Series 5.8   Series 5.7  Series 5.0

 Series 5.5  Series 5.6    Series 5.35

We present our combined pneumatic clutch-brakes. This is a system with a dual braking and clutching function, but the functions may not both be activated at the same time. 
For cases in which technical issues prevent the use of the combined clutch-brake, we offer the separate brake and clutch solution.

This is a multidisc clutch-brake of the 5.W series, which is activated pneumatically and oil-cooled.

We have different types and sizes covering a range of clutching torques from 65 Nm to 150,000 Nm to meet all kinds of requirements.

These products are used in metal cutting and bending machinery, such as presses, shears, folders, etc.

The multidisc pneumatic clutches are clutched when there is air pressure and released when there is none thanks to the springs. The pneumatic safety brakes use springs to brake when there is no air pressure. This lack of pressure may be caused by the machine itself or due to some unexpected and undesired accident or breakage. In every size there are different combinations of spring force and number of friction discs.

It combines the activation of the pneumatic clutch with the capacity of the hydraulic clutches. As a result, we have a clutch-brake with the possibility of achieving high frequency manoeuvres. The cooling depends on the energy dissipation required by the application. This cooling may be forced through an exterior circuit for which the clutch-brake is prepared. The table below shows both the clutching and braking torques as well as the pressure of the different sizes of series 5.W clutch-brakes. This technical information may be expanded by downloading the complete sheet.